RE: XP 95 Shafts
Most fitters will recommend the same shaft for any iron/wedge used for full shots. My 48 is the same graphite as the AP1 PW, and the 54/57 are in steel for the solid feel on primarily short shots.
View ArticleXP 95 Shafts
I would imagine this has been asked but I was unable to locate an answer. I have just been fit for new clubs at an outside range using TrackMan and the best shafts for the heads chosen were the TT XP...
View ArticleRE: Ferrule
Run it under hot water for a couple of seconds or use a blow dryer to heat it up then slide it back down the shaft. If you clean your clubs in hot water don't leave them submerged it loosens the epoxy...
View ArticleRE: Replacing Worn Wedges
While a simplistic way to determine when wedges should be replaced I think the real goal here is to remind folks that your wedges DO need to be replaced and possibly more often than your irons, driver,...
View ArticleReplacing Worn Wedges
I assume that most of us on TT have seen the Vokey video that tests wedge performance as they age. In that video, they state that after 75 rounds, wedge performance (i.e. spin & stopping power)...
View ArticleRE: K grind
[quote user="RRomanowicz"]i have a sm6 60 degree 12 bounce k grind, I would like to lower the bounce. I understand decreasing the loft lowers it but wondering if I could grind it and decrease the...
View ArticleRE: Sorry for the age old SM6 question but...
[quote user="Nick W"]I have the following Vokey wedges and wondered what the equivalent club in SM6 form is. I am struggling to work out the best/equivalent grind in the SM6 when compared to my old...
View ArticleSorry for the age old SM6 question but...
I have the following Vokey wedges and wondered what the equivalent club in SM6 form is. I am struggling to work out the best/equivalent grind in the SM6 when compared to my old wedges. I am looking...
View ArticleRE: Replacing Worn Wedges
Sure is different than the old days when even the tour pros didn't know better. I remember the old original Wilson R-90s were worth their weight in gold no matter how old they were!
View ArticleRE: From the Vokey Team: What's your current wedge setup?
Here are my new wedges: 51* F Grind 55* S Grind 60* M Grind(Please visit the site to view this file)
View ArticleRE: From the Vokey Team: What's your current wedge setup?
Sm5 52.12f, 56.10s, 60.08m I love these wedges!
View ArticleClik here to view.
RE: From the Vokey Team: What's your current wedge setup?
[quote user="Luke R"] Here are my new wedges: 51* F Grind 55* S Grind 60* M Grind[/quote] Not gonna lie, this made me jealous, Luke ;)
View ArticleRE: Regrooving Tool
Are your wedges chrome plated or raw? If they are chrome then you will destroy the finish. I've got an old wedge that literally stays outside all summer that I chip in the yard with and just for fun I...
View ArticleRE: From the Vokey Team: What's your current wedge setup?
I'll probably get banned for this but.... SM5 46*F Scratch 52* Scratch 58* There are a pair of new SM6's in my near future though - just have to decide on grinds.(Please visit the site to view this...
View ArticleRE: From the Vokey Team: What's your current wedge setup?
PW 46 miz JPX 900 Tour SM6 50-08 F SM6 54-10 S SM6 58-12 K SM6 62-08 M
View ArticleRE: Replacing Worn Wedges
One element I would add...we found the equivalent to 75 rounds of play was roughly 500 bunker shots. And the equivalent to 125 rounds of play was 1,000 bunker shots. It is important to note that bunker...
View ArticleClik here to view.
RE: From the Vokey Team: What's your current wedge setup?
[quote user="JRDotel"]Luke R Here are my new wedges: 51* F Grind 55* S Grind 60* M Grind Not gonna lie, this made me jealous, Luke ;)[/quote] Yeah, they are very pretty! Almost do not want to use them...
View ArticleRE: Fun Fact
Interesting. Personally, I like mine chrome and plain. Guess that I am old and conservative. With respect, it's all about choices.
View Article
